DS18 - HYDRO NXL-10SUB/BK
DS18 HYDRO NXL-10SUB/BK 10" Marine Water Resistant Subwoofer with Integrated RGB Lights 600 Watts SVC 4-Ohm - Black
The NXL-10SUB was built from the bottom up to the the best solution to getting great sounding, bumbling bass on your boat, off-road vehicle, or any application that needs a waterproof subwoofer that will stand up to the elements.
This 10 inch subwoofer is is guaranteed to bring the BOOM to your system with very hard hitting bass in a IP65 waterproof frame. This sub also includes RGB lights that connects to any RGB 4 wire circuit for a great ambiance to match your mood or color scheme for a look that will stand out from the rest. (LED-BTC recommended)
This sub comes in a 4 ohm single voice coil configuration which handles 300 watts RMS and 600 watts max power. These subs are best used in sealed and ported boxes for the best results.
Highlights
- 10 inch IP65 waterproof subwoofer made specifically to be loud in an open space and withstand the elements.
- Single 4 ohm 300 watts RMS 600 watts MAX power handling through the highly durable 2 inch voice coil for sustainable and loud bass.
- RGB lighting that shines brightly in low light situations which adds an amazing touch to your applications color scheme. (LED BTC recommended)
Specifications | |
Nominal Diameter | 10" / 254mm |
Nominal Impedance | 4 ohms |
RMS Power Handling | 300W |
MAX Power Handling | 600W |
Sensitivity (1w/1m) | 89dB |
Frequency Response | 35-250Hz |
Recommended Low Pass Crossover | 100Hz |
Body / Features | |
UV Compliant | Yes, 100% Stable |
Marine Grade Type | IP65 |
RGB LED | Yes, RGB integrated |
Grill Type | Injection Molded Composite with 316 Stainless Steel mesh |
Sold as Single | Yes |
Woofer Specifications | |
Voice Coil Diameter | 2" / 50.8mm |
Voice Coil Former Material | Glass fiber |
Winding Material | CCAW |
Cone Material | Injection Molded Polypropylene + UV Compliant |
Surround Material | Butyl (Rubber) |
Basket Material | High Temp Injection Molded Composite with UV Protection coating |
Magnet Material | Ferrite |
Magnet Weight | 72 oz |
Speaker Measurement | |
Overall Diameter | 10.76" / 273.3mm |
Overall Depth | 6.73" / 171mm |
Front Mount Baffle Cutout | 8.78" / 223mm |
Mounting Depth | 5" / 127.5mm |
Motor Diameter | 5.51" / 140mm |